QPR Knowledge Base

Process Interface Element

Hide Navigation Pane

Process Interface Element

Previous topic Next topic No expanding text in this topic  

Process Interface Element

Previous topic Next topic JavaScript is required for expanding text Mail us feedback on this topic!  

Comments (...)

A process interface element can be used to define intramodel connections and linking. The process interface element can be used to map incoming connector(s) to outgoing connector(s).

 

Defining Connector Mappings for the Interface Element

 

An intra model process flow can be defined by mapping an incoming connector to the outgoing connector. Note that the connectors to be mapped need to be created before doing the mapping.

 

To define connector mappings, do the following:

 

1.Go to the Interface tab on the Custom Element Properties dialog or on the Process Step Properties dialog.
2.Select the Interface element checkbox.
3.Click 'Select' next to the Linked to field, the Select Interface Element dialog opens.
4.In the Select Interface Element dialog, navigate the hierarchy to select the interface element to which you want to add the mapping and click OK.
5.In the Incoming connector mappings section, highlight the desired connector and click 'Select', the Select Interface Element dialog opens.
6.In the Select Interface Element dialog, select the connector to which you want to add the mapping and click OK.
7.In the Outgoing connector mappings section, click 'Select', the Select Interface Element dialog opens.
8.From the Select Interface Element dialog, select the connector to which you want to add the mapping and click OK.
9.Click OK to close the Custom Element Properties dialog.

 

Note that mapping both incoming and outgoing connectors is not mandatory, you can choose to define the mapping only for an incoming or an outgoing connector. However, there is no link back from the target interface if the mapping has not been done there.

Comments (...)